Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 110-2076, a Enco Mfg Co item with the NSN 3416013904591 that is listed alongside the description “Lathe Engine.” If you are interested in part number 110-2076 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 110-2076 is specifically listed with the NSN 3416-01-390-4591, and this code can be used to determine that it falls under FSC 3416 Lathes. Additionally, while tracing back to Enco Mfg Co, this NSN part was specifically produced under CAGE Code 0GV04. With our services and dedication to simple procurement in mind, get started with us today!
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 18 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 60.0 TO 1550.0 |
| BTTD | RATED SWING | 12.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 12.000 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 7.500 INCHES NOMINAL |
| BTWB | THREAD CHANGE QUANTITY | 40 |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 5 MORSE |
| BTYN | HOLLOW SPINDLE HOLE SIZE | 1.500 INCHES NOMINAL |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| ELEC | VOLTAGE IN VOLTS | 110.0 AND 220.0 |
| ACDC | CURRENT TYPE | AC |
| FAAZ | PHASE | SINGLE |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 CABINET STAND; 1 6 IN. 3-JAW CHUCK; 1 8 IN. 4-CHUCK; 1 4-POSITION TOOLPOST; 2 CENTERS; 1 CHIP PAN; 1 SET OF CHANGE GEARS; 1 FACEPLATE; 1 STEADY REST; 1 FOLLOWREST; 1 TOOL KIT |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| AWHA | BED TYPE | PERMANENT GAP |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| FEAT | SPECIAL FEATURES | ELECTRO-MAGNETIC STARTER SWITCH; D1-4 SPINDLE WITH 1 9/16 IN. BORE; REINFORCED CROSS RIBS; HARDENED AND GROUND BED; HEADSTOCK WITH TAPERED ROLLER BEARINGS; SWING IN GAP 17 IN.; CROSS SLIDE TRAVEL 5 1/2 IN.; COMPOUND REST TRAVEL 3 1/4 IN.; TAILSTOCK SPINDLE TRAVEL 3 3/4 IN.; TAILSTOCK TAPER 3 MORSE TAPER; 29 METRIC THREAD CHANGES 0.2MILLIMETERS TO 4.5 MILLIMETERS |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAXX | MOUNTING TYPE | BENCH |
| APGF | DESIGN TYPE | SCREW |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| ADQR | CENTER TO CENTER DISTANCE | 36.000 INCHES NOMINAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.500 INCHES NOMINAL |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 112.0 PER INCH |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
