Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number FT5195-10-12-1P, a Fastener Technology Inc item with the NSN 5310012925343 that is listed alongside the description “Nut Self Locking Spline.” If you are interested in part number FT5195-10-12-1P and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number FT5195-10-12-1P is specifically listed with the NSN 5310-01-292-5343, and this code can be used to determine that it falls under FSC 5310 Nuts and Washers. Additionally, while tracing back to Fastener Technology Inc, this NSN part was specifically produced under CAGE Code 58794. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-292-5343 Item PartTypeName: NUT,SELF-LOCKING,SPLINE | 5310 | 012925343 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FGD6010L10-M-1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| FEAT | SPECIAL FEATURES | HARDNESS RATING APPLIES TO THE BRACKET ONLY; THE NUT HAS A 160 KSI MIN TENSILE STRENGTH |
| MATT | MATERIAL | STEEL COMP 1050 BRACKET |
| MATT | MATERIAL | STEEL COMP 1075 NUT OR STEEL COMP 1050 NUT |
| MATT | MATERIAL | STEEL COMP 304 SHELL OR STEEL COMP 305 SHELL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5085 ASSN STD SINGLE MATERIAL RESPONSE BRACKET |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23195 MIL SPEC 1ST MATERIAL RESPONSE SHELL OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE SHELL OR AMS 5514 ASSN STD 2ND MATERIAL RESPONSE SHELL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-777 FED SPEC 1ST MATERIAL RESPONSE NUT OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE NUT |
| SFTT | SURFACE TREATMENT | CADMIUM BRACKET |
| SFTT | SURFACE TREATMENT | CADMIUM NUT |
| SFTT | SURFACE TREATMENT | PASSIVATE SHELL AND CADMIUM SHELL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE SHELL AND QQ-P-416,TY 2,CL 2 FED SPEC 2ND TREATMENT RESPONSE SHELL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BRACKET |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAVL | PILOT DIAMETER | 0.264 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.440 INCHES NOMINAL |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ACTA | NUT STYLE | SPLINE (FLOATING) |
| ACVN | NUT LENGTH | 0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM |
| ADEA | NUT HEIGHT | 0.658 INCHES MINIMUM AND 0.688 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.390 INCHES NOMINAL |
| BZRR | THREAD SERIES | UNJF |
| CBBL | FEATURES PROVIDED | FLOATING NUT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
