Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number EXL44B, a Federal Commercial Item Description item with the NSN 3416001897833 that is listed alongside the description “Lathe Engine.” If you are interested in part number EXL44B and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number EXL44B is specifically listed with the NSN 3416-00-189-7833, and this code can be used to determine that it falls under FSC 3416 Lathes. Additionally, while tracing back to Federal Commercial Item Description, this NSN part was specifically produced under CAGE Code 58536. With our services and dedication to simple procurement in mind, get started with us today!
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 2 MORSE |
| SR-5 | MANUFACTURERS CODE | 54522 |
| AWHA | BED TYPE | SOLID |
| ELEC | VOLTAGE IN VOLTS | 110.0 AND 220.0 |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| ACDC | CURRENT TYPE | AC |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | NONE SPECIFIED |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 0.750 |
| SR-5 | DESIGN CONTROL REFERENCE | EXL44B |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| APGF | DESIGN TYPE | SCREW |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | A-A-59334TYISTBSW10SZ20 |
| ADQR | CENTER TO CENTER DISTANCE | 26.000 INCHES NOMINAL |
| FAAZ | PHASE | THREE |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 224.0 PER INCH |
| SR-1 | MANUFACTURERS CODE | 58536 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| SR-5 | THE MANUFACTURERS DATA | |
| AAXX | MOUNTING TYPE | BENCH |
| BTTB | SPINDLE SPEED RANGE IN RPM | 34.0 TO 690.0 |
| BTTD | RATED SWING | 10.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 10.125 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 6.563 INCHES NOMINAL |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
