Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number B5151519, a Federal Mogul Corporation item with the NSN 2990003638093 that is listed alongside the description “Lever Remote Control.” If you are interested in part number B5151519 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number B5151519 is specifically listed with the NSN 2990-00-363-8093, and this code can be used to determine that it falls under FSC 2990 Miscellaneous Engine Accessories Nonaircraft. Additionally, while tracing back to Federal Mogul Corporation, this NSN part was specifically produced under CAGE Code 7U177. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
2990-00-363-8093 Item Description: LEVER,REMOTE CONTROL | 2990 | 003638093 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
5151519 | 5 | 1 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABMK | OVERALL WIDTH | 0.875 INCHES NOMINAL" |
ABRR | KEYWAY WIDTH | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM" |
ABXV | BORE DIAMETER | 0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM" |
ADGE | BORE LENGTH | 0.500 INCHES NOMINAL" |
AFYS | KEYWAY LENGTH | 0.094 INCHES NOMINAL" |
AGAV | END ITEM IDENTIFICATION | GRUMMAN AIRCRAFT,MODEL A10 AND GENERAL MOTORS CORP,LIGHT ARMORED VEHICLE MODEL LAV-25; GOVERNOR, DIESEL ENGINE" |
ASBP | BORE TYPE | PLAIN STRAIGHT" |
BFGW | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 2.250 INCHES NOMINAL" |
BFGX | SHAFT END THICKNESS | 0.344 INCHES NOMINAL" |
BFGY | LINK END THICKNESS | 0.319 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
BFHA | LINK END HOLE DIAMETER | 0.311 INCHES MINIMUM AND 0.314 INCHES MAXIMUM" |
CBBL | FEATURES PROVIDED | KEYWAY" |
CZLP | SHAFT SECURING METHOD | KEYWAY" |
FEAT | SPECIAL FEATURES | OFFSET HEIGHT: 0.375 IN. NOMINAL" |
MATT | III MATERIAL | STEEL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1117 ASSN STD 1ST MATERIAL RESPONSE OR SAE 1118 ASSN STD 2ND MATERIAL RESPONSE" |
ABMK | OVERALL WIDTH | 0.875 INCHES NOMINAL" |
ABRR | KEYWAY WIDTH | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM" |
ABXV | BORE DIAMETER | 0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM" |
ADGE | BORE LENGTH | 0.500 INCHES NOMINAL" |
AFYS | KEYWAY LENGTH | 0.094 INCHES NOMINAL" |
AGAV | END ITEM IDENTIFICATION | GRUMMAN AIRCRAFT,MODEL A10 AND GENERAL MOTORS CORP,LIGHT ARMORED VEHICLE MODEL LAV-25; GOVERNOR, DIESEL ENGINE" |
ASBP | BORE TYPE | PLAIN STRAIGHT" |
BFGW | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 2.250 INCHES NOMINAL" |
BFGX | SHAFT END THICKNESS | 0.344 INCHES NOMINAL" |
BFGY | LINK END THICKNESS | 0.319 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
BFHA | LINK END HOLE DIAMETER | 0.311 INCHES MINIMUM AND 0.314 INCHES MAXIMUM" |
CBBL | FEATURES PROVIDED | KEYWAY" |
CZLP | SHAFT SECURING METHOD | KEYWAY" |
FEAT | SPECIAL FEATURES | OFFSET HEIGHT: 0.375 IN. NOMINAL" |
MATT | III MATERIAL | STEEL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1117 ASSN STD 1ST MATERIAL RESPONSE OR SAE 1118 ASSN STD 2ND MATERIAL RESPONSE" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote