INSTANT RFQ

Request a Quote for FF-S-85 TYPE II STYLE 10P Federal Specifications Part With the NSN 5305-01-369-9501 Today

Part Number: FF-S-85 TYPE II STYLE 10P
Alternate P/N: FFS85TYPEIISTYLE10P
Manufacturer: Federal Specifications
NIIN: 013699501
CAGE Code: 81348
FSG: 53 Hardware and Abrasives
Country: USA
NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number FF-S-85 TYPE II STYLE 10P, a Federal Specifications item with the NSN 5305013699501 that is listed alongside the description “Screw Cap Hexagon Head.” If you are interested in part number FF-S-85 TYPE II STYLE 10P and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number FF-S-85 TYPE II STYLE 10P is specifically listed with the NSN 5305-01-369-9501, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to Federal Specifications, this NSN part was specifically produced under CAGE Code 81348. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number FF-S-85 TYPE II STYLE 10P with NSN 5305-01-369-9501, 5305013699501

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-369-9501

Item PartTypeName:

SCREW,CAP,HEXAGON HEAD

53050136995010N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
MS51100-2522

Characteristics Data of NSN 5305-01-369-9501, 5305013699501

MRCCriteriaCharacteristic
AASATHREAD LENGTH0.359 INCHES NOMINAL
CBBLFEATURES PROVIDEDFINISHED HEAD
AAJDTHREAD CLASS2A
AASBFASTENER LENGTH0.404 INCHES MINIMUM AND 0.435 INCHES MAXIMUM
CQFMHARDNESS RATING25.0 ROCKWELL C MINIMUM OVERALL AND 34.0 ROCKWELL C MAXIMUM OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNF
AASKHEAD STYLEHEXAGON
AHYMNOMINAL THREAD DIAMETER0.250 INCHES
BQDMHOLE TYPEDRILLED
CMLPTHREAD QUANTITY PER INCH28
CQHQMINIMUM YIELD STRENGTH40000 POUNDS PER SQUARE INCH
MATTMATERIALSTEEL COMP 410 OVERALL OR STEEL COMP 416 OVERALL OR STEEL COMP 430 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONFF-S-85 FED SPEC ALL MATERIAL RESPONSES OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
AAJFTHREAD DIRECTIONRIGHT-HAND
AASUHEAD HEIGHT0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
AATBWIDTH BETWEEN FLATS0.612 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
AAUBHOLE DIAMETER0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
ASXKHOLE QUANTITY1
CQBCMINIMUM TENSILE STRENGTH70000 POUNDS PER SQUARE INCH
CRHCHOLE CONFIGURATION STYLEHEXAGON FLATS
ZZZTNONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE

Related NSN Components of FF S 85 TYPE II STYLE 10P

Part FF-S-85 TYPE II STYLE 10P With Different Manufacturers

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top