Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number GAA6214, a Ford Motor Company item with the NSN 5306002984810 that is listed alongside the description “Bolt Externally Relieved Body.” If you are interested in part number GAA6214 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number GAA6214 is specifically listed with the NSN 5306-00-298-4810, and this code can be used to determine that it falls under FSC 5306 Bolts. Additionally, while tracing back to Ford Motor Company, this NSN part was specifically produced under CAGE Code 57526. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-298-4810 Item PartTypeName: BOLT,EXTERNALLY RELIEVED BODY | 5306 | 002984810 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GAA6214 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAWL | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER | 2.200 INCHES NOMINAL |
| AAWM | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER | 2.240 INCHES MINIMUM AND 2.280 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.770 INCHES MINIMUM FIRST HOLE AND 2.780 INCHES MAXIMUM FIRST HOLE |
| FEAT | SPECIAL FEATURES | 3RD SHOULDER HAS 1 DEG 22 MIN TAPER0.200 IN. LG TOWARD THD END,45 DEG CHAMFE 0.060 IN. LG ON THD END |
| MATT | MATERIAL | STEEL COMP 8640 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.688 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 2.940 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES NOMINAL FIRST HOLE |
| AAWC | FIRST DIAMETER FROM HEAD | 0.525 INCHES MINIMUM AND 0.526 INCHES MAXIMUM |
| AAWD | SECOND DIAMETER FROM HEAD | 0.425 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AAWE | THIRD DIAMETER FROM HEAD | 0.510 INCHES MINIMUM AND 0.511 INCHES MAXIMUM |
| AAWF | FOURTH DIAMETER FROM HEAD | 0.425 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| AAWG | FIFTH DIAMETER FROM HEAD | 0.500 INCHES NOMINAL |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.240 INCHES NOMINAL |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.980 INCHES NOMINAL |
| AAWK | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | 1.680 INCHES NOMINAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
