Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 9188077, a G And G Electronics item with the NSN 5340007890808 that is listed alongside the description “Bracket Double Angle.” If you are interested in part number 9188077 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 9188077 is specifically listed with the NSN 5340-00-789-0808, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to G And G Electronics, this NSN part was specifically produced under CAGE Code 3D955. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-789-0808 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 007890808 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9188077 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD (NON-CORE) | STAMPED |
| ADLK | FIRST LEG LENGTH | 0.602 INCHES MINIMUM AND 0.642 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.268 INCHES MINIMUM AND 0.271 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.225 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AHLZ | SECOND LEG SLOT LENGTH | 0.350 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AHMA | SECOND LEG SLOT WIDTH | 0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AHPZ | CENTER SECTION HEIGHT | 3.010 INCHES MINIMUM AND 3.050 INCHES MAXIMUM |
| AHQA | CENTER SECTION WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | FURNISHED WITH ONE NUT,SELF-LOCKING AND ONE RUBBER STRIP |
| HEAT | HEAT TREATMENT | H-14 STRAIN HARDENED,1/2 HARD |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
| AHPW | FIRST LEG THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AHQB | CENTER SECTION THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
