Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number M305791, a Garwood Feller Inc item with the NSN 3040003288862 that is listed alongside the description “Wormshaft.” If you are interested in part number M305791 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number M305791 is specifically listed with the NSN 3040-00-328-8862, and this code can be used to determine that it falls under FSC 3040 Miscellaneous Power Transmission Equipment. Additionally, while tracing back to Garwood Feller Inc, this NSN part was specifically produced under CAGE Code 61465. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-328-8862 Item PartTypeName: WORM SHAFT | 3040 | 003288862 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| M305791 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAHN | END SIMILARITY | IDENTICAL |
| ABHP | OVERALL LENGTH | 23.000 INCHES NOMINAL |
| BYFR | TEETH HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | 1.200 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 27.500 |
| CFFG | WORM HELIX ANGLE | 5 DEG 40 MIN |
| CFFH | CONCAVE WORM THROAT CURVATURE RADIUS | 1.541 INCHES NOMINAL |
| CFFJ | CONCAVE WORM THROAT DIAMETER | 12.227 INCHES NOMINAL |
| CFFK | WORM OUTSIDE DIAMETER | 4.616 INCHES MINIMUM AND 4.618 INCHES MAXIMUM |
| CFFL | WORM PITCH DIAMETER | 3.850 INCHES NOMINAL |
| CFFM | SHAFT HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| CFFN | WORM THREAD SECTION LENGTH | 3.750 INCHES NOMINAL |
| CFFP | WORM BODY LENGTH | 11.962 INCHES MINIMUM AND 11.977 INCHES MAXIMUM |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.375 INCHES NOMINAL BOTH ENDS,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.8906 INCHES NOMINAL BOTH ENDS,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 2.250 INCHES NOMINAL BOTH ENDS,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.748 INCHES MINIMUM BOTH ENDS,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.750 INCHES MAXIMUM BOTH ENDS,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.124 INCHES MINIMUM BOTH ENDS,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.126 INCHES MAXIMUM BOTH ENDS,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.3615 INCHES MINIMUM BOTH ENDS,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.3625 INCHES MAXIMUM BOTH ENDS,FIRST PORTION |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.4360 INCHES NOMINAL FIRST END |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | 0.249 INCHES NOMINAL FIRST END |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | 0.6240 INCHES NOMINAL FIRST END |
| FEAT | SPECIAL FEATURES | DRILLED AND THD HOLE IN KEYWAY END OF SHAFT 1-1/8 IN. LG DRILLED HOLE 1/2-20 NF THD SIZE TO 7/8 IN. DEEPG25 MICROINCH RMS SHAFT CENTER,60 MICROINCH RMSSHAFT OUTER ENDS,160 MICROINCH |
| MATT | MATERIAL | STEEL |
| ZZZV | FSC APPLICATION DATA | WINCH,DRUM |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
