Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 20115, a General Dynamics Global Imaging item with the NSN 5905008879471 that is listed alongside the description “Resistor Variable Wire Wound Pre.” If you are interested in part number 20115 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 20115 is specifically listed with the NSN 5905-00-887-9471, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to General Dynamics Global Imaging, this NSN part was specifically produced under CAGE Code 10112. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-00-887-9471 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 008879471 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
20115 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 3 |
AAVL | PILOT DIAMETER | 1.0295 INCHES MINIMUM AND 1.0300 INCHES MAXIMUM |
ABPA | UNDERCUT DIAMETER | 1.0295 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
ABPC | UNDERCUT WIDTH | 1.0890 INCHES MINIMUM AND 1.0990 INCHES MAXIMUM |
ABXF | SHAFT LENGTH | 0.470 INCHES MINIMUM AND 0.490 INCHES MAXIMUM |
AECZ | MOUNTING LIP DIAMETER | 1.0890 INCHES MINIMUM AND 1.0990 INCHES MAXIMUM |
AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
AEDZ | SHAFT BEARING TYPE | BALL |
AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 343.0 NOMINAL AND 347.0 NOMINAL |
AEFY | SHAFT END PLAY | 0.005 INCHES |
AEGA | LATERAL RUNOUT | 0.001 INCHES |
AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5 |
AXGY | MOUNTING METHOD | CLAMP RING |
CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
CRJS | FIXED TAP QUANTITY PER SECTION | 5 1ST SECTION AND 5 2ND SECTION AND 3 3RD SECTION |
CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION 360 DEG COSINE AND 2ND SECTION 360 DEG COSINE AND 3RD SECTION LINEAR |
AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
AAVM | PILOT LENGTH | 0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM |
ABPM | BODY DIAMETER | 1.089 INCHES MINIMUM AND 1.099 INCHES MAXIMUM |
ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
ADAQ | BODY LENGTH | 1.135 INCHES MAXIMUM |
AEDX | SHAFT STYLE | ROUND |
AEFD | ACTUATOR TYPE | SINGLE SHAFT |
AEFK | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
AEFL | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
AEFZ | SHAFT RUNOUT | 0.001 INCHES |
APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 40.0 KILOHMS 1ST SECTION AND 40.0 KILOHMS 2ND SECTION AND 20.0 KILOHMS 3RD SECTION |
CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -2.00 TO 2.00 1ST SECTION AND-2.00 TO 2.00 2ND SECTION AND-0.60 TO 0.60 3RD SECTION |
CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0 TO 400.0 SINGLE SECTION |
CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2000.0 SINGLE SECTION |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
TTQY | TERMINAL TYPE AND QUANTITY | 16 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote