Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 61166, a General Dynamics Global Imaging item with the NSN 5905009364276 that is listed alongside the description “Resistor Variable Nonwire Wound.” If you are interested in part number 61166 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 61166 is specifically listed with the NSN 5905-00-936-4276, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to General Dynamics Global Imaging, this NSN part was specifically produced under CAGE Code 10112. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-00-936-4276 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 009364276 | 0 | N | B | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | B | U | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
300FTS110 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 2 |
AAQL | BODY STYLE | CYLINDRICAL HOLE/SLOT MOUNTED |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
ABHP | OVERALL LENGTH | 5.594 INCHES NOMINAL |
ABNB | FIRST FLAT LENGTH | 0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
ABNC | FLAT HEIGHT | 0.212 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
ABPM | BODY DIAMETER | 3.000 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.244 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
ABXF | SHAFT LENGTH | 1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM |
ADAQ | BODY LENGTH | 2.469 INCHES NOMINAL |
AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.750 INCHES NOMINAL |
AEDX | SHAFT STYLE | ROUND,FLATTED |
AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 357.0 MINIMUM |
AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
AEFZ | SHAFT RUNOUT | 0.001 INCHES |
AEGA | LATERAL RUNOUT | 0.003 INCHES |
AEGB | PILOT DIAMETER RUNOUT | 0.10000 INCHES |
AEGC | SHAFT RADIAL PLAY | 0.003 INCHES |
AJYN | SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
AJYQ | SCREW THREAD QUANTITY PER INCH | 28.0 |
AKPV | MOUNTING FACILITY QUANTITY | 3 |
APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
AXGY | MOUNTING METHOD | THREADED HOLE |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS |
CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/0.10 ALL SECTIONS |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -200.0 TO 200.0 ALL SECTIONS |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 ALL SECTIONS |
CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
FEAT | SPECIAL FEATURES | SHAFTS OPERATE INDEPENDENTLY OF ONE ANOTHER |
TEST | TEST DATA DOCUMENT | 18876-10179166 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote