Request a Quote for BTM18-L General Dynamics Global Imaging Part With the NSN 5977-01-595-2227 Today

Part Number: BTM18-L

Alternate P/N: BTM18L

Manufacturer: General Dynamics Global Imaging

NSN: 5977-01-595-2227

NIIN: 015952227

Item Name : Brush Electrical Contact

CAGE Code: 1HT10

FSC: 5977 Electrical Contact Brushes and Electrodes

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number BTM18-L, a General Dynamics Global Imaging item with the NSN 5977015952227 that is listed alongside the description “Brush Electrical Contact.” If you are interested in part number BTM18-L and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number BTM18-L is specifically listed with the NSN 5977-01-595-2227, and this code can be used to determine that it falls under FSC 5977 Electrical Contact Brushes and Electrodes. Additionally, while tracing back to General Dynamics Global Imaging, this NSN part was specifically produced under CAGE Code 1HT10. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number BTM18-L with NSN 5977-01-595-2227, 5977015952227

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5977-01-595-2227 Item PartTypeName: BRUSH,ELECTRICAL CONTACT	5977	015952227		N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
BTM18-L	5	2	3

Characteristics Data of NSN 5977-01-595-2227, 5977015952227

MRC	Criteria	Characteristic
CXCY	Part Name Assigned By Controlling Agency	BTM18-L BRUSHLESS DC MOTORS
AAUB	Hole Diameter	0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
ADGZ	Distance From Center Of Hole To Outside Edge	0.8593 INCHES MINIMUM AND 0.8595 INCHES MAXIMUM
AGWM	Largest Outside Diameter	0.942 INCHES NOMINAL
MRC	Decoded Requirement	Clear Text Reply
STYL	Style Designator	ONE PIECE
AAQL	Body Style	CYLINDRICAL
CRPH	Outer Edge To Slot Edge Distance	0.041 INCHES NOMINAL
FEAT	Special Features	PEAK TORQUE:20 OZ/IN;POWER AT TP:60WATTS;MOTOR CONSTANT:2.59 OZ/IN;CONSTINUOUS TORQUE:6.0 OZ/IN;POWER AT CONSTINUOUS TORQUE:8.5 WATTS;INPUT VOLTS AT CONSTINUOUS TORQUE:8.5 VOLTS;ELECTRICAL TIME CONSTANT:0.77 MILLI-SECOND;MECHANICAL TIME CONSTANT:25 MILLI-SEC;DAMPING FACTOR:0.048 OZ/IN/RAD/SEC;ROTOR INERTIA:0.0012 OZ/IN/SEC;ANGULAR EXCURSION:+,- 50 DEGREES;TOTAL BREAKAWAY TORQUE:0.60 OZ/IN;MAX ALLOWABLE WDG TEMP:155.0C;NUMBER POLES:2;WEIGHT:5.6 OZ;WINDING CONSTANTS:RESISTANCE:6.5 +,-12.5 PERCENT OHMS;VOLTAGE AT TP:19.7 VOLTS NOMINAL;CURRENT AT TP:3.03 AMPS NOMINAL;TORQUE SENSITIVITY:6.60 OZ/IN/AMP,+,-10 PERCENT;BACK E.M.F. 0.047 VOLTS/RAD/SEC,+,-10 PERCENT;INDUCTANCE:5.0 MILLIHENRIES,+,- 30 PERCENT.
AGEK	Spring Free Length	1.717 INCHES MINIMUM AND 1.719 INCHES MAXIMUM