Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number VCT23-6N3, a General Dynamics Global Imaging item with the NSN 5990000602321 that is listed alongside the description “Synchro Control Transformer.” If you are interested in part number VCT23-6N3 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number VCT23-6N3 is specifically listed with the NSN 5990-00-060-2321, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to General Dynamics Global Imaging, this NSN part was specifically produced under CAGE Code 10112. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-060-2321 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 000602321 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 23CT6D | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND D |
| AAVH | SHOULDER DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.5950 INCHES NOMINAL |
| AAZW | SECOND SHOULDER DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.1700 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.2990 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.9900 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2403 INCHES MINIMUM SINGLE SHAFT AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.7190 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 10.0 DEG CELSIUS |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 18.5 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 400.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 4200.00 MINIMUM AND 5100.00 MAXIMUM |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 70.00 MINIMUM AND 76.00 MAXIMUM |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 1350.00 MINIMUM AND 1650.00 MAXIMUM |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 14.00 MINIMUM AND 20.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 14.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 45.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.20 INCH-OUNCES MAXIMUM |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| AJWH | SHAFT END PLAY | 0.0025 INCHES NOMINAL |
| AJWQ | PILOT LENGTH | 0.0430 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.2500 INCHES NOMINAL |
| AJWV | AFT OF FIRST FLANGE DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.5800 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2900 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/53 GOVERNMENT SPECIFICATION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
