Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number VCT226A66-36, a General Dynamics Global Imaging item with the NSN 5990000813357 that is listed alongside the description “Synchro Control Transformer.” If you are interested in part number VCT226A66-36 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number VCT226A66-36 is specifically listed with the NSN 5990-00-081-3357, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to General Dynamics Global Imaging, this NSN part was specifically produced under CAGE Code 10112. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-081-3357 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 000813357 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VCT226A66-36 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND D |
| AAVH | SHOULDER DIAMETER | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 1.0625 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM |
| AAZW | SECOND SHOULDER DIAMETER | 1.9540 INCHES MINIMUM AND 1.9600 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.0600 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.3180 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 2.2480 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.9400 INCHES MINIMUM AND 1.9600 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1555 INCHES MINIMUM SINGLE SHAFT AND 0.1560 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3650 INCHES MINIMUM SINGLE SHAFT AND 0.3850 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 105.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 41.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 1.0 WATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0020 INCHES |
| AJWQ | PILOT LENGTH | 0.1100 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM |
| AJWV | AFT OF FIRST FLANGE DIAMETER | 2.2480 INCHES MINIMUM AND 2.2520 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.6330 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNC SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.1820 INCHES MINIMUM SINGLE SHAFT AND 0.1920 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,STEPPED,THREADED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1560 INCHES MINIMUM AND 0.8440 INCHES MAXIMUM |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.112 INCHES |
| CSSD | SHAFT STEP DIAMETER | 0.1200 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8440 INCHES MINIMUM AND 0.8480 INCHES MAXIMUM |
| CTJB | SHAFT STEP LENGTH | 0.1820 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM SINGLE SHAFT |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.125 INCHES SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
