Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number CT15-6N3, a General Dynamics Global Imaging item with the NSN 5990002544825 that is listed alongside the description “Synchro Control Transformer.” If you are interested in part number CT15-6N3 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number CT15-6N3 is specifically listed with the NSN 5990-00-254-4825, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to General Dynamics Global Imaging, this NSN part was specifically produced under CAGE Code 10112. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-254-4825 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 002544825 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| M20708/21-02S | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.0430 INCHES MINIMUM AND 3.0830 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1867 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5450 INCHES MINIMUM SINGLE SHAFT AND 0.5650 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 10.0 DEG CELSIUS |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 13.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 210.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 6000.00 MINIMUM AND 7500.00 MAXIMUM |
| AJTA | ZRS RESISTANCE IN OHMS | 1300.00 MINIMUM AND 1650.00 MAXIMUM |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 78.00 MINIMUM AND 82.00 MAXIMUM |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 13.00 MINIMUM AND 18.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 45.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 65.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.05 INCH-OUNCES MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.05 INCH-OUNCES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.3910 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.0970 INCHES MINIMUM AND 1.1030 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/21 GOVERNMENT SPECIFICATION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
