Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 18G4D AC1CS, a General Dynamics Global Imaging item with the NSN 6105003999051 that is listed alongside the description “Motor Tachometer Generator.” If you are interested in part number 18G4D AC1CS and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 18G4D AC1CS is specifically listed with the NSN 6105-00-399-9051, and this code can be used to determine that it falls under FSC 6105 Motors Electrical. Additionally, while tracing back to General Dynamics Global Imaging, this NSN part was specifically produced under CAGE Code 10112. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-399-9051 Item PartTypeName: MOTOR-TACHOMETER GENERATOR | 6105 | 003999051 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 675092 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJU | OVERALL LENGTH | 4.131 INCHES |
| AAJV | OVERALL WIDTH | 1.750 INCHES |
| AASA | THREAD LENGTH | 0.375 INCHES NOMINAL SINGLE END |
| AAUH | SPLINE MINOR DIAMETER | 0.1560 INCHES NOMINAL SINGLE END |
| ABSA | SPLINE QUANTITY | 15 SINGLE END |
| ABWV | SHAFT DIAMETER | 0.176 INCHES MINIMUM SINGLE END AND 0.177 INCHES MAXIMUM SINGLE END |
| ACDC | CURRENT TYPE | AC INPUT |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| AXFH | SPLINE LENGTH | 0.5680 INCHES NOMINAL SINGLE END |
| AXGY | MOUNTING METHOD | CLAMP RING |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP COLLAR AND 4 THREADED HOLE |
| AYHE | EXCITOR TYPE | SEPARATELY EXCITED |
| BFLQ | CALIBRATION SPEED IN RPM | 1000.0 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPC | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | 3.2 AC |
| BKPH | TORQUE RATING AND TYPE | 2.4 INCH-OUNCES STALLED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 57.5 AC AND 115.0 AC |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | 9.200 WATTS INPUT |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES SINGLE END |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.451 INCHES SINGLE END |
| CWFX | ROTOR SPEED RATING IN RPM | 4500.0 SINGLE NO LOAD |
| CWGL | CURRENT RATING IN AMPS | 0.183 SINGLE INPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHZ | SHAFT END CHARACTERISTIC | A3 FIRST STYLE SINGLE END |
| FAAZ | PHASE | TWO INPUT |
| FREQ | FREQUENCY IN HERTZ | 400.0 OUTPUT |
| THSD | THREAD SERIES DESIGNATOR | UNF SINGLE END |
| TTQY | TERMINAL TYPE AND QUANTITY | 10 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
