Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 288C720-001, a General Electric Company item with the NSN 3040000335815 that is listed alongside the description “Worm Shaft.” If you are interested in part number 288C720-001 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 288C720-001 is specifically listed with the NSN 3040-00-033-5815, and this code can be used to determine that it falls under FSC 3040 Miscellaneous Power Transmission Equipment. Additionally, while tracing back to General Electric Company, this NSN part was specifically produced under CAGE Code 03502. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-033-5815 Item PartTypeName: WORM SHAFT | 3040 | 000335815 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 288C720-1 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | 20.875 INCHES NOMINAL |
| BYFR | TEETH HARDNESS RATING | C SCALE,41 TO 45 |
| CFFB | WORM THREAD QUANTITY | 3 |
| CFFC | WORM THREAD LEAD | 2.2323 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 24.217 |
| CFFG | WORM HELIX ANGLE | 15 DEG 8 MIN 47.10 SEC |
| CFFK | WORM OUTSIDE DIAMETER | 2.998 INCHES MINIMUM AND 3.000 INCHES MAXIMUM |
| CFFL | WORM PITCH DIAMETER | 2.625 INCHES NOMINAL |
| CFFM | SHAFT HARDNESS RATING | C SCALE,41 TO 45 |
| CFFN | WORM THREAD SECTION LENGTH | 4.250 INCHES NOMINAL |
| CFFP | WORM BODY LENGTH | 20.875 INCHES NOMINAL |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.813 INCHES NOMINAL FIRST END,THIRD PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.063 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.750 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 3.125 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 3.250 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 4.438 INCHES NOMINAL SECOND END,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.485 INCHES MINIMUM SECOND END,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.495 INCHES MAXIMUM SECOND END,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.499 INCHES MINIMUM FIRST END,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.500 INCHES MAXIMUM FIRST END,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5749 INCHES MINIMUM FIRST END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5749 INCHES MINIMUM SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5753 INCHES MAXIMUM FIRST END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5753 INCHES MAXIMUM SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.125 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.125 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.3700 INCHES MINIMUM SECOND END,THIRD PORTION |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.3720 INCHES MAXIMUM SECOND END,THIRD PORTION |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | 0.188 INCHES NOMINAL SECOND END,THIRD PORTION |
| CFGJ | INVOLUTE SPLINE QUANTITY | 16 FIRST END,FOURTH PORTION |
| CFGK | INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 25.0 FIRST END,FOURTH PORTION |
| CFGL | INVOLUTE SPLINE PITCH DIAMETER | 1.3330 INCHES NOMINAL FIRST END,FOURTH PORTION |
| CFGM | INVOLUTE SPLINE LENGTH | 2.188 INCHES NOMINAL FIRST END,FOURTH PORTION |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | B50R214,CLASS D,GENERAL ELECTRIC CO MFR REF SINGLE MATERIAL RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
