Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 1583M41P01, a General Electric Company item with the NSN 3110012008537 that is listed alongside the description “Bearing Ball Annular.” If you are interested in part number 1583M41P01 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 1583M41P01 is specifically listed with the NSN 3110-01-200-8537, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to General Electric Company, this NSN part was specifically produced under CAGE Code 07482. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-200-8537 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 012008537 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9341M42 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 1.1809 INCHES MINIMUM AND 1.1811 INCHES MAXIMUM |
| AEPR | FLANGE OUTSIDE DIAMETER | 2.7400 INCHES MINIMUM AND 2.7600 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | F-16 C/D ACFT |
| AGFF | FLANGE WIDTH | 0.0700 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM |
| AGVV | OUTER RING OUTSIDE DIAMETER | 2.4406 INCHES MINIMUM AND 2.4409 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| FEAT | SPECIAL FEATURES | FLANGE IS EXTENDED IN TWO PLACES 1.5400 FROM CENTER LINE AND 1.5340 FROM CENTERLINE TO PROVIDE MOUNTING TABS;EACH TAB IS 0.4800 IN. MIN 0.5200 IN. MAX WIDE W/TAPPED HOLE 0.2160 IN. MIN 0.2240 IN. MAX CENTERED IN EACH TAB;EXTENSION IS 0.8100 |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL COMP 4340 CAGE |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6491 ASSN STD 2ND MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6491 ASSN STD 3RD MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6491 ASSN STD 1ST MATERIAL RESPONSE BALL |
| STYL | STYLE DESIGNATOR | NON-LOADING GROOVE,NON-SEPARABLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
