Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 1265M98, a General Electric Company item with the NSN 4720013934529 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number 1265M98 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 1265M98 is specifically listed with the NSN 4720-01-393-4529, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to General Electric Company, this NSN part was specifically produced under CAGE Code 07482. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-393-4529 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013934529 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 109323 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKV | OUTSIDE DIAMETER | 0.812 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.156 INCHES NOMINAL 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 12.900 INCHES NOMINAL WORKING |
| AARX | INSIDE DIAMETER | 0.615 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.220 INCHES NOMINAL 1ST END |
| ABKU | FLANGE THICKNESS | 0.220 INCHES NOMINAL 2ND END |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.156 INCHES NOMINAL 1ST END |
| AGFF | FLANGE WIDTH | 1.250 INCHES NOMINAL 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| CTCJ | FLANGE STYLE | TRIANGULAR 2ND END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| AHNC | CONNECTION STYLE | PLAIN 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AECS | BOLT HOLE QUANTITY | 3 2ND END |
| AFQN | FLANGE LENGTH | 1.594 INCHES NOMINAL 1ST END |
| AHNC | CONNECTION STYLE | PLAIN 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CQBD | BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
