Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 105B2553P1, a General Electric Company item with the NSN 5340008848594 that is listed alongside the description “Bracket Double Angle.” If you are interested in part number 105B2553P1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 105B2553P1 is specifically listed with the NSN 5340-00-884-8594, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to General Electric Company, this NSN part was specifically produced under CAGE Code 24446. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-884-8594 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 008848594 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 105B2553P1 | 6 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.230 INCHES MINIMUM AND 2.250 INCHES MAXIMUM |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.270 NOMINAL MILS AND 0.290 NOMINAL CENTIMETERS |
| AHPX | SECOND LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AARN | FABRICATION METHOD | MACHINED |
| ADLK | FIRST LEG LENGTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 1.280 INCHES MINIMUM AND 1.340 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 3.070 INCHES MINIMUM AND 3.130 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| AHLN | SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHPZ | CENTER SECTION HEIGHT | 0.667 INCHES MINIMUM AND 0.699 INCHES MAXIMUM |
| AHQA | CENTER SECTION WIDTH | 3.070 INCHES MINIMUM AND 3.130 INCHES MAXIMUM |
| AHQB | CENTER SECTION THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 3.070 INCHES MINIMUM AND 3.130 INCHES MAXIMUM |
| AHQP | FIRST LEG CORNER RADIUS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| MATT | MATERIAL | STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
