Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 1105970, a General Motors Corp item with the NSN 2920003912989 that is listed alongside the description “Generator Engine Accessory.” If you are interested in part number 1105970 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 1105970 is specifically listed with the NSN 2920-00-391-2989, and this code can be used to determine that it falls under FSC 2920 Engine Electrical System Components Nonaircraft. Additionally, while tracing back to General Motors Corp, this NSN part was specifically produced under CAGE Code 24617. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-391-2989 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 003912989 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MTRC0U2400 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.720 INCHES NOMINAL |
| ABFF | FURNISHED ITEMS | RADIO INTERFERENCE SHIELDING AND WOODRUFF KEY |
| ABPT | SECOND STEP DIAMETER | 0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| ABVA | UNTHREADED PORTION LENGTH | 1.280 INCHES MINIMUM AND 1.340 INCHES MAXIMUM |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES,TOP HOLE THREADED |
| ADZC | ENVIRONMENTAL PROTECTION | DUSTPROOF AND CORROSION RESISTANT AND FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.330 INCHES MINIMUM AND 1.390 INCHES MAXIMUM |
| AWDP | THREAD DIAMETER | 0.500 INCHES NOMINAL |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1950 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 18.0 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END,THREADED,W/KEYWAY |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.500 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.103 INCHES MINIMUM AND 8.197 INCHES MAXIMUM |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.447 INCHES MINIMUM AND 0.459 INCHES MAXIMUM |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 4000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| TEST | TEST DATA DOCUMENT | 81349-MIL-G-12604 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | B CLASS AND 2 GRADE AND B GROUP |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
