Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 1102062, a General Motors Corp item with the NSN 2920007603151 that is listed alongside the description “Generator Engine Accessory.” If you are interested in part number 1102062 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 1102062 is specifically listed with the NSN 2920-00-760-3151, and this code can be used to determine that it falls under FSC 2920 Engine Electrical System Components Nonaircraft. Additionally, while tracing back to General Motors Corp, this NSN part was specifically produced under CAGE Code 61928. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-760-3151 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 007603151 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1102062 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.428 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| ABFF | FURNISHED ITEMS | WOODRUFF KEY |
| ABPT | SECOND STEP DIAMETER | 0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| ABVA | UNTHREADED PORTION LENGTH | 0.690 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1680 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 14.0 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.060 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.445 INCHES MINIMUM AND 8.569 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNC |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES,TOP HOLE THREADED |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 0.864 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| AWDP | THREAD DIAMETER | 0.312 INCHES NOMINAL |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END,THREADED,W/KEYWAY |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.060 INCHES NOMINAL |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 164.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.115 INCHES MINIMUM AND 7.139 INCHES MAXIMUM |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.316 INCHES MINIMUM AND 0.324 INCHES MAXIMUM |
| CFHL | THREAD CLASS | 2A |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
