Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 5364840M0DA8569A1, a General Motors Corp item with the NSN 3010001279685 that is listed alongside the description “Gearcase Motor.” If you are interested in part number 5364840M0DA8569A1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 5364840M0DA8569A1 is specifically listed with the NSN 3010-00-127-9685, and this code can be used to determine that it falls under FSC 3010 Torque Converters and Speed Changers. Additionally, while tracing back to General Motors Corp, this NSN part was specifically produced under CAGE Code 72560. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-127-9685 Item PartTypeName: GEARCASE-MOTOR | 3010 | 001279685 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A8569A1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 4.062 INCHES |
| AAJU | OVERALL LENGTH | 7.844 INCHES |
| AAJV | OVERALL WIDTH | 4.406 INCHES |
| AAUH | SPLINE MINOR DIAMETER | 0.417 INCHES MINIMUM AND 0.422 INCHES MAXIMUM SINGLE END |
| ABSA | SPLINE QUANTITY | 11 SINGLE END |
| ABWV | SHAFT DIAMETER | 0.5080 INCHES NOMINAL SINGLE END |
| ACDC | CURRENT TYPE | DC INPUT |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| AXCP | WINDING TYPE | SHUNT WOUND W/COMMUTATING POLES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | 0.1250 HORSEPOWER OUTPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.000 INCHES SINGLE END |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.000 INCHES SINGLE END |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.535 INCHES |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.535 INCHES |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 2000.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A14 SINGLE STYLE SINGLE END |
| FEAT | SPECIAL FEATURES | MTG PROVISION ON SHAFT END FOR HOLDING ANCILLARY EQUIPMENT |
| TTQY | TERMINAL TYPE AND QUANTITY | 1 RECEPTACLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
