Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MIL-DTL-10215K, a General Motors Corp item with the NSN 6680007527479 that is listed alongside the description “Shaft Assembly Flex.” If you are interested in part number MIL-DTL-10215K and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MIL-DTL-10215K is specifically listed with the NSN 6680-00-752-7479, and this code can be used to determine that it falls under FSC 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. Additionally, while tracing back to General Motors Corp, this NSN part was specifically produced under CAGE Code 70040. With our services and dedication to simple procurement in mind, get started with us today!
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 101.313 INCHES NOMINAL |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END UNF SECOND END |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| BJPS | CASING MATERIAL | RUBBER AND STEEL |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M10215-1F113 |
| AKMF | CORE SURFACE TREATMENT | CADMIUM PLATED |
| CGDN | MINIMUM OPERATING RADIUS | 5.000 INCHES |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| AECT | THREAD DEPTH | 0.327 INCHES NOMINAL FIRST END 0.375 INCHES NOMINAL SECOND END |
| ZZZV | III FSC APPLICATION DATA | TACHOMETER AND SPEEDOMETER DRIVE |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END 0.750 INCHES NOMINAL SECOND END |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-10215K |
| APTD | END TYPE | ROUND KEYED FIRST END SQUARE MALE SECOND END |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| ABUJ | (NON-CORE DATA) THREAD SIZE | 7/8-18 5/8-18 |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| AEDN | TIP LENGTH | 1.018 INCHES MINIMUM AND 1.022 INCHES MAXIMUM FIRST END 0.950 INCHES MINIMUM AND 1.010 INCHES MAXIMUM SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| CFRP | CASING LENGTH BETWEEN FERRULES | 100.000 INCHES NOMINAL |
| SR-1 | MANUFACTURERS CODE | 81349 |
| CFSM | (NON-CORE DATA) STRENGTH RATING CHARACTERISTICS | 15.0 POUNDS TORSION STRENGTH WINDING DIRECTION |
| CFRN | CASING SURFACE TREATMENT | ANY ACCEPTABLE |
| CFRQ | CASING OUTSIDE DIAMETER | 0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| CFRX | OVERALL END SIZE | 1.188 IN. W 0.875 IN. W |
| CFRZ | CORE OVERALL LENGTH | 101.313 INCHES NOMINAL |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.150 INCHES MINIMUM DIAMETER AND 0.153 INCHES MAXIMUM DIAMETER FIRST END 0.101 INCHES MINIMUM ACROSS FLATS AND 0.104 INCHES MAXIMUM ACROSS FLATS SECOND END |
| AKMH | CORE DIAMETER | 0.150 INCHES NOMINAL |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AAJD | THREAD CLASS | 2B FIRST END 2B SECOND END |
| SR-1 | SPEC/STD CONTROLLING DATA |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
