Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number G121-080-001, a General Smelting Co item with the NSN 5905001040926 that is listed alongside the description “Resistor Variable Nonwire Wound.” If you are interested in part number G121-080-001 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number G121-080-001 is specifically listed with the NSN 5905-00-104-0926, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to General Smelting Co, this NSN part was specifically produced under CAGE Code 84349. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-00-104-0926 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 001040926 | 0 | N | B | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | B | U | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
G121-080-001 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 1 |
AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
AAVL | PILOT DIAMETER | 0.7500 INCHES MAXIMUM |
AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
ABHP | OVERALL LENGTH | 2.593 INCHES NOMINAL |
ABPA | UNDERCUT DIAMETER | 0.750 INCHES NOMINAL |
ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.125 INCHES MAXIMUM |
ABXF | SHAFT LENGTH | 0.500 INCHES NOMINAL |
ADAQ | BODY LENGTH | 1.875 INCHES NOMINAL |
AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
AEDX | SHAFT STYLE | ROUND |
AEDZ | SHAFT BEARING TYPE | BEARING |
AEFD | ACTUATOR TYPE | SINGLE SHAFT |
AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
AEFK | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
AEFL | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
AEFM | MAXIMUM STOP TORQUE | 100.00 INCH-OUNCES |
AEFY | SHAFT END PLAY | 0.005 INCHES |
AEFZ | SHAFT RUNOUT | 0.001 INCHES |
AEGA | LATERAL RUNOUT | 0.001 INCHES |
AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
APXH | TERMINAL LOCATION | REAR END |
AXGY | MOUNTING METHOD | CLAMP RING |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 3700.0 MAXIMUM |
CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.075 TO 0.075 SINGLE SECTION |
CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 160.0 SINGLE SECTION |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -300.0 TO 300.0 SINGLE SECTION |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION GRAPH |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
TEST | TEST DATA DOCUMENT | 84347-G121-080 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote