Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 301A, a Genrad Ltd item with the NSN 5905001084667 that is listed alongside the description “Resistor Variable Wire Wound Non.” If you are interested in part number 301A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 301A is specifically listed with the NSN 5905-00-108-4667, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Genrad Ltd, this NSN part was specifically produced under CAGE Code 24655. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-108-4667 Item Description: Resistor Variable Wire Wound Non | 5905 | 001084667 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 301a | C | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 0.500 INCHES NOMINAL" |
| ABTB | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.562 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL" |
| ADAU | BODY HEIGHT | 0.320 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.700 INCHES NOMINAL" |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 OHMS SINGLE SECTION" |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.300 INCHES NOMINAL" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 0.500 INCHES NOMINAL" |
| ABTB | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.562 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL" |
| ADAU | BODY HEIGHT | 0.320 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.700 INCHES NOMINAL" |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 OHMS SINGLE SECTION" |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.300 INCHES NOMINAL" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
