Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 59A178-61665, a Globe Motors Inc item with the NSN 3010007837037 that is listed alongside the description “Gearcase Motor.” If you are interested in part number 59A178-61665 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 59A178-61665 is specifically listed with the NSN 3010-00-783-7037, and this code can be used to determine that it falls under FSC 3010 Torque Converters and Speed Changers. Additionally, while tracing back to Globe Motors Inc, this NSN part was specifically produced under CAGE Code 25140. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-783-7037 Item PartTypeName: GEARCASE-MOTOR | 3010 | 007837037 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 59A178 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJU | OVERALL LENGTH | 3.938 INCHES |
| AAJV | OVERALL WIDTH | 1.375 INCHES |
| ABWV | SHAFT DIAMETER | 0.749 INCHES MINIMUM SINGLE END AND 0.759 INCHES MAXIMUM SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| BKPH | TORQUE RATING AND TYPE | 3.0 INCH-OUNCES RUNNING |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| AAJT | OVERALL HEIGHT | 1.375 INCHES |
| ACDC | CURRENT TYPE | AC INPUT |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | 10000.0 FEET |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FLANGE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL MECHANICAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| CWDY | TEMP RATING | -40.0 OPERATING DEG CELSIUS AND 71.0 OPERATING DEG CELSIUS |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 0.406 INCHES |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.812 INCHES |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES |
| CWGL | CURRENT RATING IN AMPS | 0.100 SINGLE OUTPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 0.195 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| FAAZ | PHASE | THREE INPUT |
| FEAT | SPECIAL FEATURES | STYLE3B AS DESCRIBED HAS SMALL SHOULDER AT FLANGED END NEXT TO OUTPUT SHAFT AND NO EXTENDED EAR |
| FREQ | FREQUENCY IN HERTZ | 400.0 INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
