Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 44300-644, a Goodrich Corporation item with the NSN 5340012514144 that is listed alongside the description “Clamp Block.” If you are interested in part number 44300-644 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 44300-644 is specifically listed with the NSN 5340-01-251-4144, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Goodrich Corporation, this NSN part was specifically produced under CAGE Code 00462. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-251-4144 Item PartTypeName: CLAMP,BLOCK | 5340 | 012514144 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 44300-644 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 2.430 INCHES MINIMUM AND 2.470 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 1.400 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.900 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 1 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AXPE | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | 1.500 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 0.670 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| CWTD | CLAMPING HOLE QUANTITY | 2 |
| CWWM | CLAMPING HOLE DIAMETER | 0.834 INCHES MINIMUM ALL HOLES AND 0.854 INCHES MAXIMUM ALL HOLES |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 1.280 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/2 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
