Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number CT HSE 10 001, a Hamilton Jet Inc item with the NSN 4720015313884 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number CT HSE 10 001 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number CT HSE 10 001 is specifically listed with the NSN 4720-01-531-3884, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Hamilton Jet Inc, this NSN part was specifically produced under CAGE Code 1PWP4. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-531-3884 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 015313884 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 110482 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.750 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES" |
| AGAV | END ITEM IDENTIFICATION | WATERJET HJ241, FREEZER" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CQBD | BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER MOLDED RUBBER, SYNTHETIC" |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 60.0 DEGREES 1ST END" |
| CQRB | SEAT ANGLE | 60.0 DEGREES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND WEATHERPROOF" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 350.0 MILLIMETERS NOMINAL EXCLUDING END FITTINGS" |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; CLEANED BY AIR MATE SYSTEM" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | BSP.PL 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | BSP.PL 2ND END" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.750 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES" |
| AGAV | END ITEM IDENTIFICATION | WATERJET HJ241, FREEZER" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CQBD | BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER MOLDED RUBBER, SYNTHETIC" |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 60.0 DEGREES 1ST END" |
| CQRB | SEAT ANGLE | 60.0 DEGREES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND WEATHERPROOF" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 350.0 MILLIMETERS NOMINAL EXCLUDING END FITTINGS" |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; CLEANED BY AIR MATE SYSTEM" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | BSP.PL 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | BSP.PL 2ND END" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
