Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 31TX4A, a Hamilton Standard Electronics item with the NSN 5990008981393 that is listed alongside the description “Synchro Receiver Transmitter.” If you are interested in part number 31TX4A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 31TX4A is specifically listed with the NSN 5990-00-898-1393, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Hamilton Standard Electronics, this NSN part was specifically produced under CAGE Code 98853. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-898-1393 Item PartTypeName: SYNCHRO,RECEIVER-TRANSMITTER | 5990 | 008981393 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MIL-S-20708/62 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND D |
| AAVH | SHOULDER DIAMETER | 2.6950 INCHES MINIMUM AND 2.7000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.3000 INCHES NOMINAL |
| AAZW | SECOND SHOULDER DIAMETER | 2.7490 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.1000 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 3.0990 INCHES MINIMUM AND 3.1000 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 2.7000 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2403 INCHES MINIMUM SINGLE SHAFT AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.7300 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | 5FORRESTAL CLASS CV; STURGEON CLASS SSN (637); LOS ANGELES CLASS SSN (688); TICONDEROGA CLASS CG (47); GUN FIRE CONTROL SYSTEM,MK 68; NIMITZ CLASS CVN; SPRUANCE CLASS DD (963); VIRGINIA CLASS CGN (41); WMIS,WIND MEASURING AND INDICATING S |
| AHCG | MAXIMUM TEMP RISE | 60.0 DEG CELSIUS |
| AJSL | BODY SIZE | 31 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 1.7 AMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 14.4 WATTS MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 2.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 35.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 170.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0/8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -36.0/36.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.670 INCH-OUNCES MINIMUM |
| AJWQ | PILOT LENGTH | 0.0300 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.5950 INCHES NOMINAL |
| AJWV | AFT OF FIRST FLANGE DIAMETER | 2.7490 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 4.3700 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.3100 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSJY | TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/62 GOVERNMENT SPECIFICATION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
