Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 321250, a Hamilton Sundstrand Corporation item with the NSN 3020000981781 that is listed alongside the description “Pulley Groove.” If you are interested in part number 321250 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 321250 is specifically listed with the NSN 3020-00-098-1781, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Hamilton Sundstrand Corporation, this NSN part was specifically produced under CAGE Code 73030. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-098-1781 Item PartTypeName: PULLEY,GROOVE | 3020 | 000981781 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 321250 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUJ | SPLINE MAJOR DIAMETER | 0.682 INCHES NOMINAL |
| ABGA | GROOVE DEPTH | 0.187 INCHES NOMINAL |
| ABHE | OUTSIDE DIAMETER | 4.375 INCHES NOMINAL |
| ABKG | BOLT CIRCLE DIAMETER | 2.500 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 12 |
| ABSC | SPLINE MINOR DIAMETER | 0.560 INCHES MINIMUM AND 0.563 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.191 INCHES MINIMUM AND 0.194 INCHES MAXIMUM |
| AGGS | V GROOVE ANGLE IN DEG | 30.0 |
| AHYF | SECURING HOLE QUANTITY | 18 |
| ANNQ | MATERIAL AND LOCATION | ALUMINUM ALLOY,24ST,ALUMINUM CO OF AMERICA OR ALUMINUM ALLOY,AMS 4037,OVERALL |
| AQPL | FACE WIDTH | 0.225 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ARJD | DESIGN FORM | PLAIN |
| ASBP | BORE TYPE | INVOLUTE SPLINE |
| AWJQ | BEARINGS | NOT INCLUDED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | 0.223 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| AXHQ | GROOVE QUANTITY | 1 |
| BDTX | SPLINE PITCH DIAMETER | 0.6000 INCHES NOMINAL |
| BFYT | HOLE LOCATION | HOLES EQUALLY SPACED,1ST HOLE IN LINE W/CENTERLINE THRU SPLINE GROOVES WITHIN 0.030 |
| BSNP | SECURING METHOD | DRILLED HOLE |
| BSYG | SPLIT HUB FEATURE | NOT INCLUDED |
| BXSJ | LIGHTENING HOLE | NOT INCLUDED |
| BXSK | INTEGRAL COOLING VANE | NOT INCLUDED |
| BXSM | GROOVE SHAPE | V |
| BYDS | BORE FEATURE | INCLUDED |
| FEAT | SPECIAL FEATURES | SECURING HOLESCOUNTERBORED 0.312 IN. DIABY .037/.077 IN. DEEP,ONERECTANGULAR NOTCH LOCATED IN OUTER EDGE,BASE OF NOTCH 1.530/1.540 IN. FROM CENTER,0.498/0.501 IN. W |
| SFTT | SURFACE TREATMENT | PAINT |
| STYL | STYLE DESIGNATOR | PLAIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
