Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 12-10571, a Hamilton Sundstrand Corporation item with the NSN 5315006888066 that is listed alongside the description “Pin Shoulder Headless.” If you are interested in part number 12-10571 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 12-10571 is specifically listed with the NSN 5315-00-688-8066, and this code can be used to determine that it falls under FSC 5315 Nails Machine Keys and Pins. Additionally, while tracing back to Hamilton Sundstrand Corporation, this NSN part was specifically produced under CAGE Code 99167. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-688-8066 Item PartTypeName: PIN,SHOULDER,HEADLESS | 5315 | 006888066 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12-10571 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | SQUARE |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.3765 INCHES NOMINAL |
| ABPR | FIRST STEP DIAMETER | 0.4915 INCHES MINIMUM AND 0.4920 INCHES MAXIMUM |
| ABPS | FIRST STEP LENGTH | 1.023 INCHES NOMINAL |
| ABPT | SECOND STEP DIAMETER | 0.3120 INCHES MINIMUM AND 0.3123 INCHES MAXIMUM |
| ABPU | SECOND STEP LENGTH | 0.7155 INCHES NOMINAL |
| ABPV | THIRD STEP DIAMETER | 0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| ABPW | THIRD STEP LENGTH | 0.3765 INCHES NOMINAL |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM OVERALL AND 44.0 ROCKWELL C MAXIMUM OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| CRDY | FIRST END LOCATION | LARGE END |
| CRMG | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 60.0 MICROINCHES OVERALL |
| FEAT | SPECIAL FEATURES | SHOULDER BORED AND GROOVED-BORE,0.250 IN. DIA AND 0.300 IN. DEEP,GROOVE,0.156 IN. WIDE AND 0.119 IN. DEEP; UNDERCUT,0.281 IN. DIA AND 0.062 IN. WIDE BETWEEN FIRST AND SECOND STEPS; AND UNDERCUT,0.130 TO 0.140 IN. DIA AND 0.047 IN. WIDE BET |
| MATT | MATERIAL | COPPER ALLOY 172 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,TEMPER H FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
