INSTANT RFQ

Request a Quote for 41-16 Hansen International Inc Part With the NSN 3010-00-521-8227 Today

Part Number: 41-16
Alternate P/N: 4116
Manufacturer: Hansen International Inc
NIIN: 005218227
Item Name : Gearcase Motor
CAGE Code: 73061
FSG: 30 Mechanical Power Transmission Equipment
Country: USA
NCB Code: 00

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 41-16, a Hansen International Inc item with the NSN 3010005218227 that is listed alongside the description “Gearcase Motor.” If you are interested in part number 41-16 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 41-16 is specifically listed with the NSN 3010-00-521-8227, and this code can be used to determine that it falls under FSC 3010 Torque Converters and Speed Changers. Additionally, while tracing back to Hansen International Inc, this NSN part was specifically produced under CAGE Code 73061. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 41-16 with NSN 3010-00-521-8227, 3010005218227

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3010-00-521-8227

Item PartTypeName:

GEARCASE-MOTOR

3010005218227N
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
7100213

Characteristics Data of NSN 3010-00-521-8227, 3010005218227

MRCCriteriaCharacteristic
AAJTOVERALL HEIGHT1.641 INCHES
AAJUOVERALL LENGTH2.922 INCHES
AAJVOVERALL WIDTH1.641 INCHES
ABWVSHAFT DIAMETER0.1880 INCHES NOMINAL SINGLE END
ACDCCURRENT TYPEDC INPUT
AKCTSHAFT ROTATION DIRECTIONCLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END
AKPSDUTY CYCLEINTERMITTENT
ANPZINCLOSURE FEATURETOTALLY INCLOSED
AXCPWINDING TYPEPERMANENT MAGNET
AXGYMOUNTING METHODFACE
AXHRMOUNTING FACILITY TYPE AND QUANTITY3 UNTHREADED HOLE
BFLTTIME INTERVAL5.0 MINUTES MAXIMUM ON AND 5.0 MINUTES MINIMUM OFF
BFLYGEARED HEAD OUTPUT SHAFT ALIGNMENT POSITIONOFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END
BFMFCOOLING METHODNONVENTILATED
BKPBCURRENT RATING METHODLOAD
BKPHTORQUE RATING AND TYPE5.0 INCH-POUNDS RUNNING
BKPPSPEED CONTROL METHOD AND DEVICE TYPEAUTOMATIC MECHANICAL
BKPQINCLOSURE SPECIFICATIONCOMMERCIAL
CBBLFEATURES PROVIDEDHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
CNXSPOWER RATING0.0005 HORSEPOWER OUTPUT
CWCSLENGTH OF SHAFT FROM HOUSING0.469 INCHES SINGLE END
CWDYTEMP RATING775.0 OPERATING DEG CELSIUS
CWFQMOUNTING FACILITY CIRCLE DIAMETER0.984 INCHES
CWGLCURRENT RATING IN AMPS0.310 SINGLE OUTPUT
CWGQCONNECTION TYPE AND VOLTAGE RATING IN VOLTS6.0 LINE TO NEUTRAL SINGLE INPUT
CWHKGEARED HEAD OUTPUT SHAFT SPEED RATING0.286 SINGLE REVOLUTIONS PER MINUTE SINGLE END
CWHZSHAFT END CHARACTERISTICA1 SINGLE STYLE SINGLE END
TTQYTERMINAL TYPE AND QUANTITY2 WIRE LEAD

Related NSN Components of 41 16

Part 41-16 With Different Manufacturers

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top