Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 102635, a Harris Corporation item with the NSN 3020009715609 that is listed alongside the description “Gear Spur.” If you are interested in part number 102635 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 102635 is specifically listed with the NSN 3020-00-971-5609, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Harris Corporation, this NSN part was specifically produced under CAGE Code 24930. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-971-5609 Item PartTypeName: GEAR,SPUR | 3020 | 009715609 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 102635 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSA | SPLINE QUANTITY | 1 BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.9583 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 23 |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 0.4591 INCHES NOMINAL BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.040 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.483 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.235 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.313 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.500 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 3 STEPS FIRST END |
| CWWH | END NOMINAL LENGTH | 0.347 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.672 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.590 INCHES SECOND END |
| CWWN | END NOMINAL DIAMETER | 0.812 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.136 INCHES SECOND END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.438 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.690 INCHES SECOND END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.984 INCHES FIRST END |
| CWXG | SECOND STEP NOMINAL LENGTH | 0.065 INCHES FIRST END |
| CWXL | SECOND STEP NOMINAL DIAMETER | 1.140 INCHES FIRST END |
| CWXP | THIRD STEP NOMINAL LENGTH | 0.065 INCHES FIRST END |
| CWXT | THIRD STEP NOMINAL DIAMETER | 0.690 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | 0.800 IN. LG OF SPLINES IN BORE |
| MATT | MATERIAL | STEEL COMP 4340 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
