Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number HLT561JT-14-20, a Hi Shear Corporation item with the NSN 5320013518817 that is listed alongside the description “Pin Rivet.” If you are interested in part number HLT561JT-14-20 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number HLT561JT-14-20 is specifically listed with the NSN 5320-01-351-8817, and this code can be used to determine that it falls under FSC 5320 Rivets. Additionally, while tracing back to Hi Shear Corporation, this NSN part was specifically produced under CAGE Code 73197. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-351-8817 Item Description: Pin Rivet | 5320 | 013518817 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Hlt561jt-14-20 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.9850 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AATB | WIDTH BETWEEN FLATS | 0.1895 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.4430 INCHES MINIMUM AND 0.4435 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| AAZG | HEAD MAJOR DIAMETER | 0.6620 INCHES MINIMUM AND 0.6680 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.2500 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.4375 INCHES |
| CQSX | SHEAR STRENGTH | 132000 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MATT | MATERIAL | COBALT COMP MP-35-N OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPS-M-573,CAGEC 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.9850 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AATB | WIDTH BETWEEN FLATS | 0.1895 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.4430 INCHES MINIMUM AND 0.4435 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| AAZG | HEAD MAJOR DIAMETER | 0.6620 INCHES MINIMUM AND 0.6680 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.2500 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.4375 INCHES |
| CQSX | SHEAR STRENGTH | 132000 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MATT | MATERIAL | COBALT COMP MP-35-N OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPS-M-573,CAGEC 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.9850 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AATB | WIDTH BETWEEN FLATS | 0.1895 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.4430 INCHES MINIMUM AND 0.4435 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| AAZG | HEAD MAJOR DIAMETER | 0.6620 INCHES MINIMUM AND 0.6680 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.2500 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.4375 INCHES |
| CQSX | SHEAR STRENGTH | 132000 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MATT | MATERIAL | COBALT COMP MP-35-N OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPS-M-573,CAGEC 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.9850 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AATB | WIDTH BETWEEN FLATS | 0.1895 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.4430 INCHES MINIMUM AND 0.4435 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| AAZG | HEAD MAJOR DIAMETER | 0.6620 INCHES MINIMUM AND 0.6680 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.2500 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.4375 INCHES |
| CQSX | SHEAR STRENGTH | 132000 SINGLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MATT | MATERIAL | COBALT COMP MP-35-N OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPS-M-573,CAGEC 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
