Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 977407-10, a Honeywell International Inc item with the NSN 3110015015109 that is listed alongside the description “Plate Retaining Bearing.” If you are interested in part number 977407-10 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 977407-10 is specifically listed with the NSN 3110-01-501-5109, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Honeywell International Inc, this NSN part was specifically produced under CAGE Code 99193. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-501-5109 Item PartTypeName: PLATE,RETAINING,BEARING | 3110 | 015015109 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 977404 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | FLAT W/APERTURE" |
| ABGL | WIDTH | 1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM" |
| ABRY | LENGTH | 2.412 INCHES NOMINAL" |
| ABTB | MOUNTING HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.233 INCHES MAXIMUM" |
| ABVL | APERTURE DIAMETER | 1.660 INCHES MINIMUM AND 1.680 INCHES MAXIMUM" |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | HORIZONTAL CENTERLINE" |
| ADNU | CORNER RADIUS | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM" |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | 2.072 INCHES NOMINAL" |
| ADUM | OVERALL THICKNESS | 0.016 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | RETAINER,BEARING;GAS GENERATOR AND ACCESSORY DRIVE ASSEMBLY;AIRCRAFT A-10 THUNDERBOLT" |
| CWHW | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.036 INCHES NOMINAL" |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED" |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL 1,TY II FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | DIAMOND" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | FLAT W/APERTURE" |
| ABGL | WIDTH | 1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM" |
| ABRY | LENGTH | 2.412 INCHES NOMINAL" |
| ABTB | MOUNTING HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.233 INCHES MAXIMUM" |
| ABVL | APERTURE DIAMETER | 1.660 INCHES MINIMUM AND 1.680 INCHES MAXIMUM" |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | HORIZONTAL CENTERLINE" |
| ADNU | CORNER RADIUS | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM" |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | 2.072 INCHES NOMINAL" |
| ADUM | OVERALL THICKNESS | 0.016 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | RETAINER,BEARING;GAS GENERATOR AND ACCESSORY DRIVE ASSEMBLY;AIRCRAFT A-10 THUNDERBOLT" |
| CWHW | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.036 INCHES NOMINAL" |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED" |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL 1,TY II FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | DIAMOND" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
