Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 200WS-364, a Honeywell International Inc item with the NSN 5905001049413 that is listed alongside the description “Resistor Variable Wire Wound Pre.” If you are interested in part number 200WS-364 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 200WS-364 is specifically listed with the NSN 5905-00-104-9413, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Honeywell International Inc, this NSN part was specifically produced under CAGE Code 08815. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-104-9413 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 001049413 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | G | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 805361-1 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 4 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.625 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.880 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 2.030 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1869 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.885 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 28.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 349.8 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 2.60 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGA | LATERAL RUNOUT | 0.004 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.1 |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS 1ST SECTION AND 20.0 KILOHMS 2ND SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 75.4 3RD SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 1ST SECTION AND-0.25 TO 0.25 2ND SECTION AND-0.01 TO 0.01 3RD SECTION AND-0.00035 TO 0.00035 4TH SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 3RD SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 DEG ANGULAR ROTATION 3RD SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0 TO 2.0 1ST SECTION AND-2.0 TO 2.0 2ND SECTION AND-5.0 TO 5.0 3RD SECTION AND-2.5 TO 2.5 4TH SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION GRAPH AND 2ND SECTION GRAPH AND 3RD SECTION EQUATION AND 4TH SECTION EQUATION |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 65.0 ALL SECTIONS |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 0.005 DC |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | 70210-805361 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 15 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
