Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 116FTS254, a Honeywell International Inc item with the NSN 5905007895927 that is listed alongside the description “Resistor Variable Nonwire Wound.” If you are interested in part number 116FTS254 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 116FTS254 is specifically listed with the NSN 5905-00-789-5927, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Honeywell International Inc, this NSN part was specifically produced under CAGE Code 08815. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-789-5927 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 007895927 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 116FTS254 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.9688 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABNB | FIRST FLAT LENGTH | 0.377 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.969 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABWV | SHAFT DIAMETER | 0.1242 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.437 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.880 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 PERCENT,RATED AMPERES C FLOORING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 40.0 KILOHMS 3RD SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 1ST SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/1.00 2ND SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.50 TO 1.50 5TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.50/1.50 6TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -2.00 TO 2.00 7TH SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 30 TURRET |
| AAPN | SECTION QUANTITY | 7 |
| ABNC | FLAT HEIGHT | 0.104 INCHES MINIMUM AND 0.106 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.062 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 1.0620 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,FLATTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS 6TH SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT,RATED AMPERES C DROP SIDING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 7.5 PERCENT,RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 7.5 PERCENT,RATED AMPERES C AND BETTER V.G. STEPPING |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.65 TO 0.65 3RD SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/1.00 4TH SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 97942-577R900 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
