Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 78WS317CT, a Honeywell International Inc item with the NSN 5905008808434 that is listed alongside the description “Resistor Variable Wire Wound Pre.” If you are interested in part number 78WS317CT and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 78WS317CT is specifically listed with the NSN 5905-00-880-8434, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Honeywell International Inc, this NSN part was specifically produced under CAGE Code 08815. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-880-8434 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 008808434 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 78WS317CT | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7500 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.071 INCHES NOMINAL |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABXF | SHAFT LENGTH | 0.690 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
| AAPN | SECTION QUANTITY | 1 |
| ABHP | OVERALL LENGTH | 1.288 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ABWV | SHAFT DIAMETER | 0.1249 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.593 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.065 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.469 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 354.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.20 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.15 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.001 INCHES |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE AND CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 177.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30 TO 0.30 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -0.1 TO 0.1 DEG ANGULAR ROTATION SINGLE SECTION |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -200.0 TO 200.0 SINGLE SECTION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
