Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 98CM2404-1, a Howe Machine And Tool Corp item with the NSN 3110006334779 that is listed alongside the description “Bearing Ball Rod End.” If you are interested in part number 98CM2404-1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 98CM2404-1 is specifically listed with the NSN 3110-00-633-4779, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Howe Machine And Tool Corp, this NSN part was specifically produced under CAGE Code 65777. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-633-4779 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 006334779 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 98CM2404-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZE | SHANK DIAMETER | 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AAZF | SHANK STYLE | HOLLOW |
| ABHP | OVERALL LENGTH | 3.0310 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.0620 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.2190 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 2.5000 INCHES NOMINAL |
| AGXJ | SHANK BORE DIAMETER | 0.1410 INCHES MINIMUM AND 0.1460 INCHES MAXIMUM |
| AGXK | SHANK BORE DEPTH | 1.5150 INCHES MINIMUM AND 1.5460 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| AKVV | INTERNAL CLEARANCE | 0.0000 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR ROD END BALL BEARING |
| FEAT | SPECIAL FEATURES | PLATING ON EXTERNAL SURFACES OF BEARING ONLY |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL |
| MATT | MATERIAL | STEEL COMP 303 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 OR STEEL COMP E51100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS 3666 ASSN STD 2ND MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM BALL |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | SINGLE ROW,BALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
