Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 79201E0126A, a Hydraflow Equipment Company item with the NSN 4720014373053 that is listed alongside the description “Hose Assembly Air Breathing.” If you are interested in part number 79201E0126A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 79201E0126A is specifically listed with the NSN 4720-01-437-3053, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Hydraflow Equipment Company, this NSN part was specifically produced under CAGE Code 24984. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-437-3053 Item PartTypeName: HOSE ASSEMBLY,AIR BREATHING | 4720 | 014373053 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 79201E0126A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAGT | WALL THICKNESS | 0.150 INCHES NOMINAL" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL FIRST END" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.000 INCHES" |
| AGAV | END ITEM IDENTIFICATION | USED ON WEAPON SYSTEM AIRCRAFT, AIRLIFTER C-17A" |
| AMPZ | UNABLE TO DECODE | UNABLE TO DECODE" |
| AWLS | CONNECTION TYPE | ERR-030 BOTH ENDS" |
| CQGM | MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES BOTH ENDS" |
| CRXX | MEASURING METHOD AND LENGTH | 12.750 INCHES NOMINAL OVERALL" |
| CXMG | COUPLING STYLE | THREADED INTERNAL BOTH ENDS" |
| CXMT | EXTERNAL OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH" |
| FEAT | SPECIAL FEATURES | FITTING ENDS HAVE A 37 DEGREE SEAT ANGLE" |
| MATT | III MATERIAL | ALUMINUM ALLOY BOTH END COUPLINGS" |
| MATT | III MATERIAL | PLASTIC POLYAMIDE 2ND PLY" |
| MATT | III MATERIAL | PLASTIC POLYESTER COVER" |
| MATT | III MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE 1ST PLY" |
| MATT | III MATERIAL | STEEL CORROSION RESISTING REINFORCING WIRE" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE BOTH END COUPLINGS" |
| SFTT | SURFACE TREATMENT | ANODIZE BOTH END COUPLINGS" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TYPE 2, CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE BOTH END COUPLINGS" |
| STYL | STYLE DESIGNATOR | SLEEVE SECTION" |
| THSD | THREAD SERIES DESIGNATOR | UNJF BOTH ENDS" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAGT | WALL THICKNESS | 0.150 INCHES NOMINAL" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL FIRST END" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.000 INCHES" |
| AGAV | END ITEM IDENTIFICATION | USED ON WEAPON SYSTEM AIRCRAFT, AIRLIFTER C-17A" |
| AMPZ | UNABLE TO DECODE | UNABLE TO DECODE" |
| AWLS | CONNECTION TYPE | ERR-030 BOTH ENDS" |
| CQGM | MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES BOTH ENDS" |
| CRXX | MEASURING METHOD AND LENGTH | 12.750 INCHES NOMINAL OVERALL" |
| CXMG | COUPLING STYLE | THREADED INTERNAL BOTH ENDS" |
| CXMT | EXTERNAL OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH" |
| FEAT | SPECIAL FEATURES | FITTING ENDS HAVE A 37 DEGREE SEAT ANGLE" |
| MATT | III MATERIAL | ALUMINUM ALLOY BOTH END COUPLINGS" |
| MATT | III MATERIAL | PLASTIC POLYAMIDE 2ND PLY" |
| MATT | III MATERIAL | PLASTIC POLYESTER COVER" |
| MATT | III MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE 1ST PLY" |
| MATT | III MATERIAL | STEEL CORROSION RESISTING REINFORCING WIRE" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE BOTH END COUPLINGS" |
| SFTT | SURFACE TREATMENT | ANODIZE BOTH END COUPLINGS" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TYPE 2, CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE BOTH END COUPLINGS" |
| STYL | STYLE DESIGNATOR | SLEEVE SECTION" |
| THSD | THREAD SERIES DESIGNATOR | UNJF BOTH ENDS" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
