Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number N6ER2024PH4520PH-70, a Imperial Electric Company The item with the NSN 4720013526001 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number N6ER2024PH4520PH-70 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number N6ER2024PH4520PH-70 is specifically listed with the NSN 4720-01-352-6001, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Imperial Electric Company The, this NSN part was specifically produced under CAGE Code 30327. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-352-6001 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013526001 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| N6ER2024PH4520PH-70 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKU | FLANGE THICKNESS | 0.405 INCHES NOMINAL 1ST END |
| ADJS | EXTERIOR COLOR | RED |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 16.500 INCHES |
| AHNC | CONNECTION STYLE | RAISED 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CQBD | BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CQGM | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 70.000 INCHES NOMINAL OVERALL |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC |
| AHNX | BOLT HOLE DIAMETER | 0.656 INCHES NOMINAL 2ND END |
| AJEE | RAISED FACE DIAMETER | 2.500 INCHES NOMINAL 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AARX | INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.495 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.960 INCHES NOMINAL |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.625 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.125 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AFQN | FLANGE LENGTH | 3.720 INCHES MINIMUM AND 3.780 INCHES MAXIMUM 1ST END |
| AGAV | END ITEM IDENTIFICATION | 2010-01-251-2227,PROPELLING UNIT,OUTBOARD |
| AGFF | FLANGE WIDTH | 2.960 INCHES NOMINAL 1ST END |
| AHNC | CONNECTION STYLE | RAISED 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.531 INCHES NOMINAL 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.180 INCHES NOMINAL 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.360 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AFQN | FLANGE LENGTH | 4.380 INCHES MINIMUM AND 4.500 INCHES MAXIMUM 2ND END |
| AGFF | FLANGE WIDTH | 3.660 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.405 INCHES NOMINAL 1ST END |
| AJED | RAISED FACE HEIGHT | 0.495 INCHES NOMINAL 2ND END |
| AJEE | RAISED FACE DIAMETER | 2.125 INCHES NOMINAL 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 1ST LAYER SPIRALLY LAID STEEL WIRE 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND 5TH LAYER SPIRALLY LAID STEEL WIRE AND 6TH L |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
