Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 59-1902-1, a Janco Corporation item with the NSN 5930000040227 that is listed alongside the description “Switch Rotary.” If you are interested in part number 59-1902-1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 59-1902-1 is specifically listed with the NSN 5930-00-004-0227, and this code can be used to determine that it falls under FSC 5930 Switches. Additionally, while tracing back to Janco Corporation, this NSN part was specifically produced under CAGE Code 91812. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-00-004-0227 Item PartTypeName: SWITCH,ROTARY | 5930 | 000040227 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 973557-1C | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| AASA | THREAD LENGTH | 0.417 INCHES MINIMUM AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ABHP | OVERALL LENGTH | 3.014 INCHES MAXIMUM |
| ABNB | FIRST FLAT LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM SINGLE ACTUATOR |
| ABNC | FLAT HEIGHT | 0.214 INCHES NOMINAL SINGLE ACTUATOR |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| ABXF | SHAFT LENGTH | 0.834 INCHES MINIMUM AND 0.914 INCHES MAXIMUM SINGLE ACTUATOR |
| ADAV | OVERALL DIAMETER | 1.250 INCHES MAXIMUM |
| AFBH | INDIVIDUAL SECTION QUANTITY | 4 |
| AFDC | NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 OCLOCK |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL AND NONPILE-UP NONSYMMETRICAL |
| AKPX | POLE QUANTITY | 1 2ND SECTION FRONT |
| AKPX | POLE QUANTITY | 1 3RD SECTION FRONT |
| AKPX | POLE QUANTITY | 1 4TH SECTION FRONT |
| AKPY | THROW QUANTITY | 4 2ND SECTION REAR |
| AKPY | THROW QUANTITY | 4 3RD SECTION REAR |
| AKPY | THROW QUANTITY | 4 4TH SECTION REAR |
| AXGY | MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | 195.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND,FLATTED SINGLE ACTUATOR |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 2ND SECTION REAR |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 3RD SECTION REAR |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 4TH SECTION REAR |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 45.0 DEGREES SINGLE ACTUATOR |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | 2.000 TO 4.000 INCH-POUNDS SINGLE ACTUATOR |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AND 500.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| STYL | STYLE DESIGNATOR | TAP,CIRCULAR,BUSHING MOUNT |
| TEST | TEST DATA DOCUMENT | 96906-MIL-STD-202 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS,INDIVIDUAL MANUFACTUREER STANDARDS,ETC.). |
| THSD | THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
