Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number C554AP005, a Jered Llc item with the NSN 3020014368744 that is listed alongside the description “Gear Spur.” If you are interested in part number C554AP005 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number C554AP005 is specifically listed with the NSN 3020-01-436-8744, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Jered Llc, this NSN part was specifically produced under CAGE Code 98523. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-436-8744 Item PartTypeName: GEAR,SPUR | 3020 | 014368744 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| H554AP001 FIND NO. 4 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE" |
| AGAV | END ITEM IDENTIFICATION | W/S WASP CLASS LHD" |
| AGJS | PITCH DIAMETER | 8.0000 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 64" |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS" |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH HUB, SECOND END" |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 AXIALLY THROUGH HUB, SECOND END" |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.375 INCHES AXIALLY THROUGH HUB, SECOND END" |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED AXIALLY THROUGH HUB, SECOND END" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 8.250 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.250 INCHES BOTH ENDS" |
| CWRM | FACE NOMINAL WIDTH | 1.250 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 1.250 INCHES BOTH ENDS" |
| CWSN | KEYWAY NOMINAL WIDTH | 0.249 INCHES BOTH ENDS" |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.752 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PINNED SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 2.750 INCHES SECOND END" |
| MATT | III MATERIAL | BRONZE OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B584-C86200 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE" |
| AGAV | END ITEM IDENTIFICATION | W/S WASP CLASS LHD" |
| AGJS | PITCH DIAMETER | 8.0000 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 64" |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS" |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH HUB, SECOND END" |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 AXIALLY THROUGH HUB, SECOND END" |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.375 INCHES AXIALLY THROUGH HUB, SECOND END" |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED AXIALLY THROUGH HUB, SECOND END" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 8.250 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.250 INCHES BOTH ENDS" |
| CWRM | FACE NOMINAL WIDTH | 1.250 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 1.250 INCHES BOTH ENDS" |
| CWSN | KEYWAY NOMINAL WIDTH | 0.249 INCHES BOTH ENDS" |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.752 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PINNED SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 2.750 INCHES SECOND END" |
| MATT | III MATERIAL | BRONZE OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B584-C86200 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
