Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number KPD328-05-028, a Kamatics Corporation item with the NSN 3120013357174 that is listed alongside the description “Bearing Sleeve.” If you are interested in part number KPD328-05-028 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number KPD328-05-028 is specifically listed with the NSN 3120-01-335-7174, and this code can be used to determine that it falls under FSC 3120 Bearings Plain Unmounted. Additionally, while tracing back to Kamatics Corporation, this NSN part was specifically produced under CAGE Code 50632. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3120-01-335-7174 Item PartTypeName: BEARING,SLEEVE | 3120 | 013357174 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
04A061-05-028 | 5 | 2 | 1 |
MRC | Criteria | Characteristic |
---|---|---|
ADAR | BODY OUTSIDE DIAMETER | 0.4381 INCHES MINIMUM AND 0.4387 INCHES MAXIMUM |
AGFF | FLANGE WIDTH | 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM |
BZLX | CORNER SHAPE | CHAMFERED INSIDE RIGHT CORNER |
BZLX | CORNER SHAPE | SQUARE INSIDE LEFT CORNER |
BZLX | CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
BZLX | CORNER SHAPE | UNDERCUT LEFT FLANGE BODY CORNER |
CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF BODY |
CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF LEFT FLANGE AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF LEFT FLANGE |
MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC POLYAMIDE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY |
MATT | MATERIAL | STEEL COMP 630 RIGHT END SURFACE OF BODY |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INSIDE DIAMETER SURFACE OF BODY |
ZZZK | SPECIFICATION/STANDARD DATA | 50632-04A061 MANUFACTURERS STANDARD |
ABHP | OVERALL LENGTH | 0.3420 INCHES NOMINAL |
AEPR | FLANGE OUTSIDE DIAMETER | 0.7200 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM |
BZLX | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
CSYM | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY |
MATT | MATERIAL | STEEL COMP 630 LEFT END SURFACE OF BODY AND FLANGE |
BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF BODY |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE |
STYL | STYLE DESIGNATOR | SOLID,EXTERNAL FLANGE ONE END |
ADAS | BODY INSIDE DIAMETER | 0.3020 INCHES MINIMUM AND 0.3030 INCHES MAXIMUM |
CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM LEFT END SURFACE OF BODY AND FLANGE AND 37.0 ROCKWELL C MAXIMUM LEFT END SURFACE OF BODY AND FLANGE |
CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF FLANGE AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF FLANGE |
CSYM | SURFACE FINISH | 16.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE |
MATT | MATERIAL | STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY |
MATT | MATERIAL | STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF FLANGE |
MATT | MATERIAL | STEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote