Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 5RS931-3A, a Kearfott Corporation item with the NSN 5990006830531 that is listed alongside the description “Resolver Electrical.” If you are interested in part number 5RS931-3A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 5RS931-3A is specifically listed with the NSN 5990-00-683-0531, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Kearfott Corporation, this NSN part was specifically produced under CAGE Code 88818. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5990-00-683-0531 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 006830531 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
C740931019 | 1 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAFZ | BODY MATERIAL | STEEL,STAINLESS |
AAQL | BODY STYLE | STANDARD ROUND C |
AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
ABHP | OVERALL LENGTH | 2.1290 INCHES MINIMUM AND 2.1530 INCHES MAXIMUM |
ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
ABXF | SHAFT LENGTH | 0.3640 INCHES MINIMUM SINGLE SHAFT AND 0.3880 INCHES MAXIMUM SINGLE SHAFT |
AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
AJSL | BODY SIZE | 11 |
AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
AJST | ROTOR INPUT CURRENT RATING | 20.0 MILLIAMPERES MAXIMUM |
AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 80.0 MILLIWATTS NOMINAL |
AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 1580.00 NOMINAL |
AJTH | ZRO IMPEDANCE ANGLE IN DEG | 78.50 NOMINAL |
AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 1300.00 NOMINAL |
AJTK | ZSO IMPEDANCE ANGLE IN DEG | 78.00 NOMINAL |
AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | 4.0 NOMINAL |
AJVF | PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT NOMINAL |
AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 29.00 OUTPUT |
AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 46.00 |
AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7650 INCHES NOMINAL |
CQTM | TERMINAL LOCATION | REAR |
CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
CRHN | SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
CSJY | TRANSFORMATION RATIO | 0.846 ROTOR TO STATOR NOMINAL |
TTQY | TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote