Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 901044-1C, a Kosmo Gears item with the NSN 3020010557643 that is listed alongside the description “Gear Antibacklash Spur.” If you are interested in part number 901044-1C and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 901044-1C is specifically listed with the NSN 3020-01-055-7643, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Kosmo Gears, this NSN part was specifically produced under CAGE Code 22371. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-055-7643 Item PartTypeName: GEAR,ANTIBACKLASH,SPUR | 3020 | 010557643 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 901044 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | 2.7500 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 176 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.781 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.044 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.282 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.104 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| CWRS | BORE NOMINAL DIAMETER | 0.312 INCHES SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 2 STEPS FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 2.750 INCHES BETWEEN BODY AND FLANGE |
| CWWH | END NOMINAL LENGTH | 0.141 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.312 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.062 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.302 INCHES FIRST END |
| CWXG | SECOND STEP NOMINAL LENGTH | 0.078 INCHES FIRST END |
| CWXL | SECOND STEP NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
