Request a Quote for 1263723-10 L 3 Communications Corporation Part With the NSN 3040-01-483-2631 Today

Part Number: 1263723-10

Alternate P/N: 126372310

Manufacturer: L 3 Communications Corporation

NSN: 3040-01-483-2631

NIIN: 014832631

Item Name : Collar Shaft

CAGE Code: 1NZ85

FSC: 3040 Miscellaneous Power Transmission Equipment

FSG: 30 Mechanical Power Transmission Equipment

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 1263723-10, a L 3 Communications Corporation item with the NSN 3040014832631 that is listed alongside the description “Collar Shaft.” If you are interested in part number 1263723-10 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 1263723-10 is specifically listed with the NSN 3040-01-483-2631, and this code can be used to determine that it falls under FSC 3040 Miscellaneous Power Transmission Equipment. Additionally, while tracing back to L 3 Communications Corporation, this NSN part was specifically produced under CAGE Code 1NZ85. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 1263723-10 with NSN 3040-01-483-2631, 3040014832631

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-01-483-2631 Item PartTypeName: COLLAR,SHAFT	3040	014832631	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1263723	5	9	5

Characteristics Data of NSN 3040-01-483-2631, 3040014832631

MRC	Criteria	Characteristic
AATE	CHAMFER ANGLE IN DEG	45.0
ABKV	OUTSIDE DIAMETER	0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
ABLJ	INTERNAL STRAIGHT KEY WIDTH	0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM
ABNM	THICKNESS	0.132 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
ABXV	BORE DIAMETER	0.2031 INCHES MINIMUM AND 0.2051 INCHES MAXIMUM
AEUZ	LARGEST DIAMETER LENGTH	0.105 INCHES NOMINAL
AEVC	KEY QUANTITY	1
AEVD	DISTANCE FROM CENTER OF BORE TO TOP OF KEY	0.0765 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	AIRCRAFT,STARLIFTER C-141
AHYF	SECURING HOLE QUANTITY	2
AHYG	ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG	90.0
CQBP	SCREW THREAD SERIES DESIGNATOR AND LOCATION	ALL HOLES UNF
CQKB	SECURING HOLE TYPE AND LOCATION	THREADED ALL HOLES
CRWB	NOMINAL THREAD SIZE AND LOCATION	0.099 INCHES ALL HOLES
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	CLAMP-COLLAR
FEAT	SPECIAL FEATURES	ALL CORNERS AND BORE CHAMFERED 45 DEG. X .010; MATERIAL QQ-S-763 CL 303 OR 303SE; NHA INDICATED AIRSPEED MECHANISM ASSEMBLY.
MATL	MATERIAL	STEEL, QQ-S-763
STYL	STYLE DESIGNATOR	ROUND W/DOUBLE CHAMFER
AATE	CHAMFER ANGLE IN DEG	45.0
ABKV	OUTSIDE DIAMETER	0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
ABLJ	INTERNAL STRAIGHT KEY WIDTH	0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM
ABNM	THICKNESS	0.132 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
ABXV	BORE DIAMETER	0.2031 INCHES MINIMUM AND 0.2051 INCHES MAXIMUM
AEUZ	LARGEST DIAMETER LENGTH	0.105 INCHES NOMINAL
AEVC	KEY QUANTITY	1
AEVD	DISTANCE FROM CENTER OF BORE TO TOP OF KEY	0.0765 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	AIRCRAFT,STARLIFTER C-141
AHYF	SECURING HOLE QUANTITY	2
AHYG	ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG	90.0
CQBP	SCREW THREAD SERIES DESIGNATOR AND LOCATION	ALL HOLES UNF
CQKB	SECURING HOLE TYPE AND LOCATION	THREADED ALL HOLES
CRWB	NOMINAL THREAD SIZE AND LOCATION	0.099 INCHES ALL HOLES
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	CLAMP-COLLAR
FEAT	SPECIAL FEATURES	ALL CORNERS AND BORE CHAMFERED 45 DEG. X .010; MATERIAL QQ-S-763 CL 303 OR 303SE; NHA INDICATED AIRSPEED MECHANISM ASSEMBLY.
MATL	MATERIAL	STEEL, QQ-S-763
STYL	STYLE DESIGNATOR	ROUND W/DOUBLE CHAMFER