Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 247165, a L 3 Communications Corporation item with the NSN 5905007408009 that is listed alongside the description “Resistor Variable Wire Wound Pre.” If you are interested in part number 247165 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 247165 is specifically listed with the NSN 5905-00-740-8009, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to L 3 Communications Corporation, this NSN part was specifically produced under CAGE Code 1PQF4. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-740-8009 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 007408009 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7609-1227-0 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7496 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.172 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.6245 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 2.370 INCHES MINIMUM AND 2.375 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.265 INCHES MINIMUM AND 2.281 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.792 INCHES MINIMUM AND 2.813 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.932 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFL | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS SINGLE SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1800.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3660.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR SINGLE SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/1.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD |
| AAPN | SECTION QUANTITY | 1 |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.8350 INCHES MINIMUM AND 1.8400 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3660.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.30 INCH-OUNCES |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
