Request a Quote for 405S291201102-7 L 3 Communications Mas (Canada) Inc Part With the NSN 5340-01-089-2597 Today

Part Number: 405S291201102-7

Alternate P/N: 405S2912011027

Manufacturer: L 3 Communications Mas (Canada) Inc

NSN: 5340-01-089-2597

NIIN: 010892597

Item Name : Bracket Angle

CAGE Code: L1912

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 405S291201102-7, a L 3 Communications Mas (Canada) Inc item with the NSN 5340010892597 that is listed alongside the description “Bracket Angle.” If you are interested in part number 405S291201102-7 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 405S291201102-7 is specifically listed with the NSN 5340-01-089-2597, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to L 3 Communications Mas (Canada) Inc, this NSN part was specifically produced under CAGE Code L1912. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 405S291201102-7 with NSN 5340-01-089-2597, 5340010892597

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-089-2597 Item PartTypeName: BRACKET,ANGLE	5340	010892597	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
ST9M580-1N	2	9	5

Characteristics Data of NSN 5340-01-089-2597, 5340010892597

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.750 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	0.750 INCHES NOMINAL
AHLF	SECOND LEG WIDTH	0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM
AHLG	SECOND LEG CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHLK	FIRST LEG HOLE DIAMETER	0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
AHLN	SECOND LEG HOLE DIAMETER	0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM
AHLP	SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHPW	FIRST LEG THICKNESS	0.050 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.050 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM
AHQP	FIRST LEG CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AJZU	FIRST LEG STYLE	CORNER RADIUS
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
AKBU	SECOND LEG STYLE	CORNER RADIUS
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	TWO HOLES
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
MATT	MATERIAL	ALUMINUM ALLOY 2024
SFTT	SURFACE TREATMENT	PAINT
STYL	STYLE DESIGNATOR	ANGLE