Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 513083, a L3 Technologies Inc item with the NSN 3020007372687 that is listed alongside the description “Gear Bevel.” If you are interested in part number 513083 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 513083 is specifically listed with the NSN 3020-00-737-2687, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to L3 Technologies Inc, this NSN part was specifically produced under CAGE Code 02978. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-737-2687 Item PartTypeName: GEAR,BEVEL | 3020 | 007372687 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 513083 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| ABSA | SPLINE QUANTITY | 14 BOTH ENDS |
| AGJS | PITCH DIAMETER | 4.5714 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 32 |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 1.4000 INCHES NOMINAL BOTH ENDS |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM BODY AND 34.0 ROCKWELL C MAXIMUM BODY |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM TEETH AND 62.0 ROCKWELL C MAXIMUM TEETH |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 47.8156 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.172 INCHES FIRST END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.176 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 1.000 INCHES |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.5200 INCHES SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 1.875 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.880 INCHES SECOND END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 2.120 INCHES SECOND END |
| FEAT | SPECIAL FEATURES | TOOTH PRESSURE ANGLE 30.0 DEG |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048,FS8615,FS8620,FS8720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 4.625 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.177 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWRS | BORE NOMINAL DIAMETER | 1.443 INCHES BOTH ENDS |
| CWRX | BORE NOMINAL DEPTH | 1.177 INCHES BOTH ENDS |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 1.575 INCHES SECOND END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | SIDE FACE,PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
